Backpacking Tent Fundamentals

Tent Weight and Size

The qualities desirable in a backpacking tent are different from those tents being pitched next to a car in a campground. The biggest difference being that the backpacking tent will be carried with you and therefore, should be small and lightweight. Most modern two person tents weight around four to five lbs. whereas a roomy family camping tent can weigh twenty lbs or more. Solo or single person tents can weigh less than three lbs and are great if you are hiking alone. However, if you are hiking with someone else, it usually works out better weight wise to split the gear and take a two person tent.

Tent Quality

The quality of the tent is more important when backpacking because there is usually nowhere dry to go if the tent starts leaking. While a top quality tent is not necessary, cheap discount store tents should only be used if the forecast calls for clear weather.
Being tired, wet, and cold knowing the next dry place is at least ten miles away on a rocky trail will quickly put a damper on what should be an enjoyable outdoor experience.

Clips and Sleeves

There are two common ways that tent poles are attached to the tent. One is using sleeves that the poles slide through and the other is using clips that latch over the poles. Some tents even use a combination of clips and sleeves. In general, clip based designs are easier and faster to set up, while sleeve based designs are stronger and can be easily repaired with a needle and thread right at the camp site. For most conditions, I believe the clips are plenty strong and are generally better because of how quickly they allow the tent to be set up and dismantled.

Free Standing and Staked Designs

Free standing tents seem to have become the norm. Their primary advantage is that they can be set up without being staked into the ground. Stakes are still important to keep the tent from blowing around, but the stakes usually do not need to be driven far into the ground. Staked tents tend to be a bit lighter than free standing tents, but need to be staked solidly into the ground to hold their shape. Staked tents can be difficult to set up or keep up if the soil is hard or rocky. I've become a convert from staked tents to freestanding tents after bending multiple tent pegs beyond repair trying to pitch the tent on hard rocky ground.

Single Wall and Double Wall Construction

Double wall tents are tents that require a separate rain fly to keep out water. Although they are slightly heavier than their single walled counterparts and take a bit longer to set up, they are generally less expensive, warmer, and hold up better in wet conditions. While the lower weight specifications and small packing size of the single wall tents make them attractive, the double wall tents are generally a better deal economically.

Three Season and Four Season Specifications

Three season tents are just that; tents designed for Spring, Summer, and Fall camping. Few people go backpacking in the winter compared to the other three seasons, so the vast majority of tents sold are three season tents. Four season tents are built from heavier materials in order to hold up against the winter weather and are bulkier and harder to carry. Some manufacturers offer a 3+ season tent if you are camping early in the Spring or late in the Fall; but unless you are planning specifically to camp in the winter months a three season tent is more than sufficient without undue bulk and weight.

Vestibules

If you don't have room to keep your shoes in the tent with you, vestibules are a great place to keep them dry and yet outside the main tent. Some vestibules provide enough of an overhang to allow the screen or even the door to be open during the rain. I personally enjoy feeling the breeze from a storm while I am dry inside the tent. Most people probably would not consider the vestibule worth the weight, but they are a nice luxury.

Conclusions

While different individuals will select different tents based on various factors, understanding the fundamentals differences between tents can help you pick the tent design that fits your hiking style and conditions.

Toasters - how do you make your toast?

Toasters are one of the most useful kitchen appliances, and at the same time also one of the simplest. You put bread in the top, push the lever, and a few minutes later it pops up: toast! The most basic toasters are very cheap indeed, and worth every penny for all the use you can get out of them. However, unlike with many appliances, you will see visible improvements for every extra little bit of money you spend on your toaster. You can go from two slices at a time to four, from two minutes’ cooking time to one, get a bun rack for toasting things like croissants, get the capability to toast frozen bread, extra lift to allow you to toast smaller things like crumpets and muffins, and all sorts of other features besides. Whether or not you need these features will generally depend on what you want to toast: if you just want toasted bread, you should be fine with a normal toaster, but if you want to toast all sorts of bread products, you start needing some other features, especially the extra lift and the bun rack. It can also be difficult to find the exact combination of features you want in a colour and design you would like, but don’t give up: just about every combination is out there somewhere. One thing to be aware of with toasters is that, if toast or something else somehow gets stuck, you should never try to remove it with a metal knife or other metal object, because they conduct electricity and can lead to an electric shock. You should also make sure to keep the toaster away from water, and be careful not to use frozen bread unless the toaster is capable of it. Another popular kind of toaster is the sandwich toaster, which differs from the usual slot toaster in that you put in more slices of bread, usually four, with things in between, and they then become sandwiches. This can be especially effective if you use things that will melt, like cheese, in the sandwiches – the traditional toaster’s inability to melt things onto the toast has long been considered a disadvantage.